Yes you can fail the driving test for stalling, but there’s usually specific reasons that results in a failure. The first reason is due to the amount of times that the test candidate stalls.
Learners often ask ‘How many times can you stall in a driving test?’ Stalling once or twice or perhaps even three times will usually not result in a test failure providing you recover from the stall in a safe and reasonably timely manner. However, if you continuously stall throughout the test, the examiner will have little option but to mark this down as a serious fault due to lack of control when moving off.
Additionally, if you stall during different circumstances, for example once during a manoeuvre, another at a junction and one while moving off, the outcome might be more favourable than if you consistently stalled only at junctions for example.
It’s not just about how many times you stall the car, it’s also about where you stall. Stalling on a test manoeuvre for example, is far less likely to result in a failure as you’re probably not going to inconvenience anyone else. However, stalling at certain other traffic situations may represent a much more hazardous issue. The following examples could see a candidate failing the driving test for stalling the car just once:
- Attempting to emerge from a junction and stall. This delay by missing the gap in traffic will inconvenience those behind you. Another more serious issue is that the driver behind you will see you begin to move off and react by also moving off, only then having to abruptly brake when you stall. This could attract a serious fault (test failure).
- Attempting to emerge from a junction and stall over the junction line. This can easily be considered a dangerous fault if the delay in recovering from the stall causes approaching drivers to change speed or direction.
You can apply those examples to many situations (roundabouts, traffic lights etc), but as we now know, it’s not just the number of times you stall, or where you stall, but also how you recover from a stall.
If you do happen to stall on the driving test, recovery should include two factors; control and speed. Neither should be compromised. Let’s look at two examples of a lack of control and speed that are best avoided:
- Control – The test candidate stalls the car and attempts to restart the engine but forgets to depress the clutch. In this instance, the car will likely lurch forward. Whilst this isn’t necessarily a test failure (it will at the very least attract a driver fault) it does significantly increase the risk of a serious or dangerous fault occurring.
- Speed – The test candidate stalls the car, panics and gets muddled with getting the car going again. This could attract a fault or possibly a serious fault simply due to the candidate taking too long.
This does of course lead to the question:
How to Recover From a Stall
There’s two options here to begin with. Option one is a method that some driving instructors teach which is the obligatory hand brake and neutral routine. After a stall, the learner driver will fully depress the clutch, apply the hand brake, select neutral and restart the engine.
Whilst this does offer the greatest from of control (no lurching forward by starting the engine in gear), it does run the risk of compromising the other factor, which is speed. Running through this routine takes time, which is perhaps not ideal if you stall at a busy junction.
Option two is the best method, but it does take a little more confidence and that’s to deal with each situation accordingly. Let’s get something out of the way; if you stall on a driving test, there’s no rule that says you must apply the hand brake and there’s no rule that says you must select neutral. Let’s look at a example:
- You stall while moving off uphill. You don’t want to risk rolling back, so you would depress the clutch and foot brake, apply the hand brake and leave the gear in 1st. Restart the engine and perhaps find the clutch bite point as that may help to avoid stalling.
- You stall while moving off on a level surface. All you need to do is depress the clutch and foot brake (if already stationary), leave the car in gear (assuming that it’s 1st gear) and restart the engine.
- You stall the engine but the car is still rolling forward. In this situation it would appear normal procedure to quickly apply the foot brake in order to gain control. But you need to consider what’s going on behind you. Is there another vehicle? Have they already started to move off? Suddenly hitting the brakes is something that the driver behind isn’t expecting and could result in a collision. So the answer here would be to simply depress the clutch and restart whilst rolling. This is a situation where the hand brake and neutral routine might cause problems.
Recovering from a stall requires different actions for different situations and requires the confidence to find a solution quickly and safely. To a certain extent, this can be practiced on a quiet road where you can attempt to run through as many scenarios as possible.
Moving Off From the Side of the Road
During the driving test, examiner will ask you to pull up on the left on a few occasions. You might also be asked to pull up on the right for a manoeuvre. After parking up, you’ll need to move off and before doing so you’ll need to get the car ready to go, then the safety observations; check the mirrors and the blind spot and go if all is clear.
As you can imagine, this moving off procedure can often result in stalling the car – which is fine. The problem here is that the test candidate gets flustered, restarts the engine and moves off without safety observations again. That’s a fail! If you stall whilst moving off from the side of the road, get the car ready and do the safety observations again before moving off.
Stalling During Driving Test But Not During Lessons
This is something that happens quite frequently, so you’re not alone. Not necessarily stalling, it could be anything. A learner drives perfectly during their lessons and come driving test day, they make all manner of faults that they would normally not do. This is simply down to high levels of anxiety and stress. You might find that having a mock driving test or two before the real test could help you to assimilate and ultimately reduce stress levels.
The thing to remember whilst on a driving test is that a stall usually isn’t a fail. Just try to remain calm, gain control of the vehicle and get going as safely and quickly as possible. Panicking will probably make the situation worse. Stalling on a driving test is usually because the test candidate doesn’t want to appear hesitant or too slow and brings the clutch up too quickly.
How to Stop Stalling a Car
If you are prone to stalling and are looking for some tips and advice, see: