Speeding whether as a qualified driver or a learner driver is easily done, especially if you’re not concentrating on the road.

Excessive or inappropriate use of speed is one of the major causes of accidents in the UK, so it’s little surprise that driving examiners take such driving behaviour seriously.

It’s not always an immediate test failure if speed is exceeded or used inappropriately, it depends on the circumstances and if you are actually aware of your actions. Explained is the common forms of speeding during a driving test, what the examiner is looking for and how to reduce or stop speeding.

Insuring a car, especially for young drivers is extremely expensive. This is of course because statistically they are the most likely to have accidents. Usually, this results from excessive or inappropriate use of speed.

Excessive speed

Excessive speed is simply driving over the speed limit. The two main reasons for this as a learner driver is that you are unaware of the current speed limit or that you are aware of what the speed limit is, but your concentration is elsewhere and you are unaware of your current speed.

Many driving tests are failed each year due to speeding

Inappropriate use of speed

Inappropriate use of speed can be for many situations. A very common test failure is learner drivers approaching junctions at inappropriate speeds. Typically this will be a closed junction (see junctions for information on closed junctions), although this can also refer to crossroads and roundabouts as a form of junction. A learner may approach this form of junction too fast for what they can see. Resulting in excessive braking, stopping over the junction line or stopping unnecessarily at a roundabout when it is safe to proceed.

Other examples of inappropriate use of speed could be passing parked cars or cyclists too fast for the conditions due to not being able to see hazards (approaching vehicles) ahead far enough. Weather conditions also play a part. Speed may need to be reduced if wet especially on bends and high speed roads. The 2 second rule will also need to be extended.

How to stop speeding

If you are unaware of the current speed limit, it could be because you have failed to notice speed limit signs. Ask your passenger or driving instructor to ensure that you are aware of each and every road sign you pass and to provide a full explanation of their meaning – not just speed limit signs. Continue to do this until you are looking well ahead and reading road signs as part of the course of natural driving. This will heighten your awareness of road signs.

Alternatively you may enter a new road that does not have speed limit signs. Usually, a new road with a different speed limit to the road you were on previously will have speed limit signs, however, you will need to use your judgement on using the correct speed. Roads that have a 20 mph speed limit will be clearly signed as they are often roads with schools or large numbers of pedestrians.

Most urban roads however have a 30 mph speed limit with the occasional 40 mph limit. If the area is pedestrianized, has pavements, houses, street lighting, it is highly likely to be 30 mph limit. 40 mph roads are often wider, straighter and have less residential areas. The majority of roads where the speed limit changes are usually well signed, so practicing the reading of all road signs is of primary importance, if in doubt however, keep to 30 mph.

Although driving slower than a roads speed limit can be hazardous if the conditions allow you to drive at the actual speed limit safely, it is ultimately safer to drive 10 mph slower than 10 mph faster and exceed the speed limit. An inappropriate use of speed if done unintentionally, generally comes down to a lack of anticipation and planning. Anticipation and planning takes time to learn as it involves understanding the correct speed, actions and forward thinking for any given road or situation.

Speed limits

20 mph speed limit
Although still relatively infrequent, 20 mph speed limits are often found around highly pedestrianized areas and schools. 20 mph speed limits are however becoming more common place and are likely to be wide spread within a year or two. 20 mph zones are often hazardous areas and exceeding the speed limit in such areas is highly likely to result in a driving test failure.

20 mph speed limit when lights flash

Other than the typical red circular speed limit signs, another type of sigh associated with 20 mph speed limits is the 20 mph speed limit when lights flash sign. These are usually located around schools and are active at school starting and finishing times. Although they appear easy to understand, a learner can easily see only the 20 mph speed limit and not read the text and drive at 20 mph when they should in fact be driving at 30 mph. Text can vary depending on sign.

30 mph speed limit
A 30 mph speed limit is the standard found in villages, towns and cities. More urban roads will however be lowered to 20 mph speed limits in time.

40 and 50 mph speed limits
The 40 mph limit being more common than the 50 mph, these speed limits are found in less pedestrianized areas such as ring-roads and urban dual carriageways. When entering a 30 mph zone from these higher speed limits, signs are clearly displayed.

National speed limit sign

60 mph speed limit
Found on single carriageway roads that connect villages, towns and cities. A 60 mph sign is not usually displayed, instead the national speed limit sign is used. UK national speed limits depend on the type of road. For high speed single carriageways the speed limit is 60 mph.

70 mph speed limit
Dual carriageways and motorways have a maximum of 70 mph speed limit unless otherwise stated by use of signs or light signals.

Driving test speed limits

The practical driving test can be failed, although not always for driving either too fast or too slow depending on the speed limits, conditions or circumstances. Developing your speed awareness is necessary to avoid such predicaments. See speed awareness for possible speed related test failures and developing speed awareness.


2 thoughts on “Speeding”

  1. Gareth Rafferty

    Hello, I just had my driving test and the weather was undecided and it kept raining, sleet, and then sunny. On the road of my test centre when I was returning, the speed limit started at 30mph and I knew the speed. Then on that road it turns to a national speed limit road further up. However because it was raining and I couldn’t see much I was messing around with the window wipers and went above the speed limit by 5mph. I had the examiner and their line manager in the car at the time. When I got to the test centre they told me I had failed due to going over the speed limit by 5mph due to messing with window wipers. Would you say this was fair and that I should have failed? That was all I failed on and I had 3 minors.

  2. Hello Gareth.
    There is a speed enforcement guidance policy outlined by the government Crown Prosecution Service (CPS) which states that there is an acceptable margin that the limit can be exceeded by. This is 10 percent, plus 2 mph (as of 2013) and would place your speed of 35 mph whilst driving in a 30 mph limit zone as an offence.

    If there was a police officer or camera that caught you, you would be looking at a fine plus penalty points. Based on that, I don’t think the examiner had any other option but to fail you I’m afraid.

Leave a Reply

Your email address will not be published.

Exit mobile version